Spark Plug Construction

[vc_row element_id=”142163″ css=”.vc_custom_1593102241503{margin-bottom: 20px !important;}”][vc_column][vc_column_text animation_delay=”0″]A spark plug comprises three main parts: the housing, insulator, and electrodes.
* Example: IRIDIUM POWER[/vc_column_text][/vc_column][vc_column][vc_single_image image=”8988″ img_size=”full” alignment=”center”][/vc_column][/vc_row][vc_row element_id=”117909″ css=”.vc_custom_1593102230705{margin-bottom: 20px !important;}”][vc_column animation_delay=”0″ width=”1/4″ element_id=”666256″ crp=”480:i:i,480-768:i:i,768-1024:i:i,1024-1280:i:i,1280-1366:i:i,1366-1600:i:i,1600-1920:i:i”][vc_column_text animation_delay=”0″ css=”.vc_custom_1593102507069{margin-bottom: 10px !important;}”]

1- Insulator

[/vc_column_text][vc_single_image image=”8989″][/vc_column][vc_column width=”2/3″][vc_column_text animation_delay=”0″]Insulates the terminal, center shaft and center electrode from the housing, preventing escape of high voltage from the electrodes.
Since the bottom of the insulator projects into the combustion chamber, high purity alumina with superior heat-proof characteristic, mechanical strength, excellent insulation and thermal conductivity at high temperature, etc. is used.[/vc_column_text][/vc_column][/vc_row][vc_row element_id=”117909″ css=”.vc_custom_1593102230705{margin-bottom: 20px !important;}”][vc_column animation_delay=”0″ width=”1/4″ element_id=”666256″ crp=”480:i:i,480-768:i:i,768-1024:i:i,1024-1280:i:i,1280-1366:i:i,1366-1600:i:i,1600-1920:i:i”][vc_column_text animation_delay=”0″ css=”.vc_custom_1593102618530{margin-bottom: 10px !important;}”]

2- Terminal

[/vc_column_text][vc_single_image image=”8994″][/vc_column][vc_column width=”2/3″][vc_column_text animation_delay=”0″]The terminal is connected to a high-tension cord through which high-voltage current from the ignition system flows.
A terminal nut is installed so this type can support almost any high-tension cord in the world. For vehicles not requiring a terminal nut, the terminal can be removed.[/vc_column_text][/vc_column][/vc_row][vc_row element_id=”117909″ css=”.vc_custom_1593102230705{margin-bottom: 20px !important;}”][vc_column animation_delay=”0″ width=”1/4″ element_id=”666256″ crp=”480:i:i,480-768:i:i,768-1024:i:i,1024-1280:i:i,1280-1366:i:i,1366-1600:i:i,1600-1920:i:i”][vc_column_text animation_delay=”0″ css=”.vc_custom_1593102402018{margin-bottom: 10px !important;}”]

3- Ring, packing washer

[/vc_column_text][vc_single_image image=”8995″][/vc_column][vc_column width=”2/3″][vc_column_text animation_delay=”0″]Makes the insulator and the housing fit tightly to each other and maintains the airtightness.[/vc_column_text][/vc_column][/vc_row][vc_row element_id=”117909″ css=”.vc_custom_1593102230705{margin-bottom: 20px !important;}”][vc_column animation_delay=”0″ width=”1/4″ element_id=”666256″ crp=”480:i:i,480-768:i:i,768-1024:i:i,1024-1280:i:i,1280-1366:i:i,1366-1600:i:i,1600-1920:i:i”][vc_column_text animation_delay=”0″ css=”.vc_custom_1593102492094{margin-bottom: 10px !important;}”]

4- Center shaft (stem)

[/vc_column_text][vc_single_image image=”8996″][/vc_column][vc_column width=”2/3″][vc_column_text animation_delay=”0″]Center shaft connecting the terminal and the center electrode.
This shaft is made of steel and has the role of allowing high-voltage current to flow from the terminal to the center electrode without loss.[/vc_column_text][/vc_column][/vc_row][vc_row element_id=”117909″ css=”.vc_custom_1593102230705{margin-bottom: 20px !important;}”][vc_column animation_delay=”0″ width=”1/4″ element_id=”666256″ crp=”480:i:i,480-768:i:i,768-1024:i:i,1024-1280:i:i,1280-1366:i:i,1366-1600:i:i,1600-1920:i:i”][vc_column_text animation_delay=”0″ css=”.vc_custom_1593102701835{margin-bottom: 10px !important;}”]

5- Housing

[/vc_column_text][vc_single_image image=”8997″][/vc_column][vc_column width=”2/3″][vc_column_text animation_delay=”0″]The housing forms an outer shell that surrounds the insulator, supports the insulator, and installs the spark plug in the engine.
At the bottom the ground electrode is located, so current can flow through the engine itself to the center electrode over the gap.[/vc_column_text][/vc_column][/vc_row][vc_row element_id=”117909″ css=”.vc_custom_1593102230705{margin-bottom: 20px !important;}”][vc_column animation_delay=”0″ width=”1/4″ element_id=”666256″ crp=”480:i:i,480-768:i:i,768-1024:i:i,1024-1280:i:i,1280-1366:i:i,1366-1600:i:i,1600-1920:i:i”][vc_column_text animation_delay=”0″ css=”.vc_custom_1593102867685{margin-bottom: 10px !important;}”]

6- Glass Seal

[/vc_column_text][vc_single_image image=”8999″][/vc_column][vc_column width=”2/3″][vc_column_text animation_delay=”0″]Mounted between the center shaft and insulator to maintain the airtightness.
Denso uses the glass seal method.
A special mixture of glass powder and copper powder is charged in the installation section for the insulator and center shaft and center electrode and melted at high temperature. This bonds the center shaft and the center electrode and fuses the insulator and the metal.
The sealing for both is good and the thermal ratio of expansion is appropriate, so even under harsh conditions gaps do not occur and good airtightness can be secured.[/vc_column_text][/vc_column][/vc_row][vc_row element_id=”117909″ css=”.vc_custom_1593102230705{margin-bottom: 20px !important;}”][vc_column animation_delay=”0″ width=”1/4″ element_id=”666256″ crp=”480:i:i,480-768:i:i,768-1024:i:i,1024-1280:i:i,1280-1366:i:i,1366-1600:i:i,1600-1920:i:i”][vc_column_text animation_delay=”0″ css=”.vc_custom_1593102885478{margin-bottom: 10px !important;}”]

7- Gasket

[/vc_column_text][vc_single_image image=”9000″][/vc_column][vc_column width=”2/3″][vc_column_text animation_delay=”0″]Makes the housing and the engine fit tightly to each other and maintains the airtightness of the combustion chamber.
There is a procedure for tightening and the appropriate tightening margin must be secured.[/vc_column_text][/vc_column][/vc_row][vc_row element_id=”117909″ css=”.vc_custom_1593102230705{margin-bottom: 20px !important;}”][vc_column animation_delay=”0″ width=”1/4″ element_id=”666256″ crp=”480:i:i,480-768:i:i,768-1024:i:i,1024-1280:i:i,1280-1366:i:i,1366-1600:i:i,1600-1920:i:i”][vc_column_text animation_delay=”0″ css=”.vc_custom_1593102971227{margin-bottom: 10px !important;}”]

8- Electrode with copper

[/vc_column_text][vc_single_image image=”9001″][/vc_column][vc_column width=”2/3″][vc_column_text animation_delay=”0″]Special nickel alloy is used for the center electrode to reduce electrode wear.
Copper is sealed into the center section to improve thermal conductivity.[/vc_column_text][/vc_column][/vc_row][vc_row element_id=”117909″ css=”.vc_custom_1593102230705{margin-bottom: 20px !important;}”][vc_column animation_delay=”0″ width=”1/4″ element_id=”666256″ crp=”480:i:i,480-768:i:i,768-1024:i:i,1024-1280:i:i,1280-1366:i:i,1366-1600:i:i,1600-1920:i:i”][vc_column_text animation_delay=”0″ css=”.vc_custom_1593103036669{margin-bottom: 10px !important;}”]

9- Ring, packing washer

[/vc_column_text][vc_single_image image=”9002″][/vc_column][vc_column width=”2/3″][vc_column_text animation_delay=”0″]Makes the insulator and the housing fit tightly to each other and maintains the airtightness.[/vc_column_text][/vc_column][/vc_row][vc_row element_id=”117909″ css=”.vc_custom_1593102230705{margin-bottom: 20px !important;}”][vc_column animation_delay=”0″ width=”1/4″ element_id=”666256″ crp=”480:i:i,480-768:i:i,768-1024:i:i,1024-1280:i:i,1280-1366:i:i,1366-1600:i:i,1600-1920:i:i”][vc_column_text animation_delay=”0″ css=”.vc_custom_1593103147543{margin-bottom: 10px !important;}”]

10- Center Electrode

[/vc_column_text][vc_single_image image=”9003″][/vc_column][vc_column width=”2/3″][vc_column_text animation_delay=”0″]A new iridium alloy tip with a diameter of 0.4 mm is laser welded to the tip of the center electrode to make the center electrode.
This lowers the spark voltage, secure reliable spark, reduces the quenching effect, and improves ignition performance.
Iridium, like platinum, is a precious metal and has extraordinarily superior properties for a spark plug electrode, for example high-temperature withstand, high strength, and low resistance. In order to further improve oxidation resistance at high temperatures, Denso developed a unique new iridium alloy containing rhodium.[/vc_column_text][/vc_column][/vc_row][vc_row element_id=”117909″ css=”.vc_custom_1593102230705{margin-bottom: 20px !important;}”][vc_column animation_delay=”0″ width=”1/4″ element_id=”666256″ crp=”480:i:i,480-768:i:i,768-1024:i:i,1024-1280:i:i,1280-1366:i:i,1366-1600:i:i,1600-1920:i:i”][vc_column_text animation_delay=”0″ css=”.vc_custom_1593103336627{margin-bottom: 10px !important;}”]

11- U-groove ground electrode

[/vc_column_text][vc_single_image image=”9005″][/vc_column][vc_column width=”2/3″][vc_column_text animation_delay=”0″]Nickel chrome material is used for the ground electrode and various measures are taken with the shape to improve ignition performance.
One of these measures is the U-groove.
(1) The surface contacted by the air-fuel mixture is large,
(2) There is much edge section, and sparks occur easily.
(3) The flame core (flame size) widens easily.
There are many other features as well and large ignition energy can be obtained.
Denso obtained patents for spark plug U-grooves from 1975 to 1992.[/vc_column_text][/vc_column][/vc_row][vc_row element_id=”117909″ css=”.vc_custom_1593102230705{margin-bottom: 20px !important;}”][vc_column animation_delay=”0″ width=”1/4″ element_id=”666256″ crp=”480:i:i,480-768:i:i,768-1024:i:i,1024-1280:i:i,1280-1366:i:i,1366-1600:i:i,1600-1920:i:i”][vc_column_text animation_delay=”0″ css=”.vc_custom_1593103391822{margin-bottom: 10px !important;}”]

12- Tapered cut ground electrode

[/vc_column_text][vc_single_image image=”9006″][/vc_column][vc_column width=”2/3″][vc_column_text animation_delay=”0″]The ground electrode has a shape in which the electrode tip is cut to a finely tapered shape.
This reduces the quenching effect, so it improves ignition performance.[/vc_column_text][/vc_column][/vc_row]